| WIIKEY CHIP FOR NINTENDO WII VERSIONS |
| Modchip-wizard™ Console mods |
modchip-wizard™ Brisbane 0405 080 644
modchip-wizard™ Sydney 0405 066 615
modchip-wizard™ Melbourne 0433 481 775
EMAIL --- wii@blade.cc
Wii Hard Drive Upgrades
Latest Wii Firmware Mods
Modded Wii Console
Wii USB Hard Drive
All Wii Mod chip installations with Homebrew
Wii softmod install
xbox360 firmware upgrade mods
Xbox re-flashing
Xbox Samsung sh-d162c
Pre-modded Wii & Firmware Modded Xbox 360 consoles
Playstation 2 with mod Pre-modded systems
Lg GDR-8163B wii back-up drives In stock
Xbox 360 Firmware upgrades repairs Playstation 2, Nintendo wii, Sony PSP & Microsoft Xbox 360 consoles. We use the best modding methods to play all your favorite backup games. All repairs and upgrades need to be booked and we can provide a reliable courier pick-up from your home. We install modchips for the Wii including homebrew, Xbox 360 firmware flashing mods for all drives
All repairs & modchip upgrades need to be booked and we can also provide a reliable courier pick-up from your home if required. Pick-ups available Brisbane Northside, Sunshine Coast, Gold Coast, QLD & Australia wide.
Best value & service
WII UPGRADE STAGES
STAGE 1. Chip
STAGE 2. Secondary Operating System
STAGE 3. Wii Expanded Storage - Hard Drives.
Read Below for More Details on Each Stage & Then Follow The Links For More.
If You Want More Information on any of the Following Try These Links
Wii STAGE 1
http://www.wii-mod-chips.htm
Wii STAGE 2
http://www.wii-O/S-mods.htm
Wii STAGE 3
http://www.wii-USB-Hardrives.htm
WII UPGRADE STAGE 1
"CHIP INSTALLATION"
A Wii Modchip Allows the Wii to Play Back Up Copy Games on DVD
100% PAL Australian Backup Copy Games Work and 85% NTSC Import Games
Just a chip is generally - $88.00-$119 for Basic Chips and $149.00 For the Latest /Best Chip
( Extra $25.00 if you have the Black Epoxy Glue to remove on the Drive Chip- New Models Only )
Wii STAGE 1
http://www.wii-mod-chips.htm
WII UPGRADE STAGE 2
"O/S INSTALLATION"
Just Some of the Tools and Applications include:
Wii Multi Region Free Boot Code - Plays all ( 100% ) international Games on your Wii- no more Black Screen.
Wii Update Blocker - If your Game Disc asks you to update the Wii before you can Play it just Restart the Game through this neat application to start the game without the Game asking to Update.
Wii Emulators- Play your Favourite Old Time Classics
Wii Media player to play DiVX, XVID, DVD, Mp3 etc ( Samples Installed )
Wii FTP to Rip Games From your Wii to your PC
Wii Update Blocker ( TONA Shop Installer ) - Makes Modded Wii 100% Safe Online and Update Proof
Wii Game Backup Tools can also now transfer Gamecube and Wii games to either - SD Card - USB thumbstick or USB Hard drive or By WiFi Wireless to PC where you can make a Backup Copy of your games on a DVD using a Burner.
Wii STAGE 2
http://www.wii-O/S-mods.htm
WII UPGRADE STAGE 3
"Wii HD DRIVE"
Back Up your Game Discs Directly onto a Compatible External Wii USB Hard Drive
Just Insert Your Game Discs into the Wii Console one at a Time and Backup Copy directly on to the Hard drive.
Store and Play Your Games off the Hard Drive without requiring the Game Disc To be Inserted.
Play all Media Files - DiVX - XViD - AVI - MPEG - MP3 Etc . From a USB Thumbstick or SD Card or Wii USB Hard Drive
Wii USB LOADER HARD DRIVES AVAILABLE
80GB . 160GB . 250GB . 320GB . 400GB . 500GB
Wii STAGE 3
http://www.wii-USB-Hardrives.htm
|
Wii key Mod-Chip - Nintendo Wii Mod-Chips
Install Your Wiikey with Ilib Region Free Booter for 100% Backups and Import Wii Games to Play Flawlessly.
First generation mod chip WiiKey has received rave review for its ease of use. Introduced in early 2007, the WiiKey mod chip was quickly snapped up by gamers who are into modding their consoles. The WiiKey mod chip is installed on the Wii DVD drive chip and not on the Nintendo Wii motherboard making it undetectable by the wii firmware. It causes the DVD identification sensor to read a backup or copy CD as an original and send a message to the motherboard to run the CD as such. The WiiKey mod chip directly boots Wii backups (iso files burned to a DVD-R), Game Console backups, and homebrew.
The WiiKey and WiiKey2 mod chip is easy to handle. Installation requires soldering. It comes in a small plastic pack with includes a Dilith Diode to use in installing the wii key mod chip on the Nintendo Wii DVD drive chip. It has six soldering holes for easily aligning the solder points to the bridge points on the Wii DVD drive. The WiiKey mod chip can be installed by a professional in less than 30 minutes.
DVD burned backups can be read by DVD drives mod with the wii key after the mod chip installation. CD game backups are recommended to be burned at 4x speed to make it reliable. The wii key mod chip is supported by D2B DVD drive chips. For WiiKey mod chip compatibility, check for console versions and consult the product specifications list in the wii key mod chip’s website.
Modchip-wizard™ Game console mods
modchip-wizard™ Brisbane 0405 080 644
modchip-wizard™ Sydney 0405 066 615
modchip-wizard™ Melbourne 0433 481 775
EMAIL --- wii@blade.cc
Actually, I just installed homebrew channel to run some jap region game which my wiikey desn't support very well.
And I heard Cios will support more campatability between software boot and drives, so I decided to installed them together.
Unfortunately, some error happened, and none of my backups can be read, only the official zelda TP is working at the moment.
I installed cIOS38_rev13b-Installer though homebrew channel at first, and use the installer to setup the IOS38-64-v3610.wad.
After that, I used Wad Manager to install ios55-64-v4633, v4113, and v3609.
Now, if I use freeregion to run the copy disc, it will coms up a codedump screen, and softchip gives me Excepion：Loctl error （DI—ReadID, gamma gives silimier error as well.
Thus I thought it might be the wiikey firmwire is stopped working, I tried to burn 1.9b recovery disc on dvd-r as 2X speed. Tried couple of times to reset and wait for 5 minutes, not working.
My wii is bought in melbourne, pal wii, system 3.3e, wiikey version was 1.9g before. Hope you can give me some further helps, thanks.
Regards,
Chen.Z
Wii Console Drive Chipset Board Models :
GC2-DMS – Wii Chipset no pins cut and can have mod chip installation
GC2R-D2A – Wii Chipset no pins cut and can have mod chip installation
GC2-D2B – Wii Chipset found with/without pins cut but can have modchip installation
GC2-D2C – Wii Chipset so far no pins cut and only compatible with .: D2C MOD CHIPS :.
GC2-D2C2 – Wii Chipset so far no pins cut and only compatible with .: D2C2 MODCHIPS :.
GC2-D2E – Wii Chipset only compatible with .: D2E WII MOD CHIPS :. Wii chip installed
Wii ARGON CHIP : New 9 Wire Argon Firmware available: DMS - D2A - D2B - D2C - D2E
WASABUS - 2.5 CONFIRMED VERSION
Code injected in the controller is the same like wasabi, is tested in this version only on WII D2C versions.
After we will finish the porting on ARGON SPI we will add the support of old DMS versions.
Be careful, the diagram is little changed, the U point is different than first diagram, pls. note this!
To Play NTSC Games on Chip Wii Console:
Connect wii by component cables- if possible. (Red Green Blue)
Turn off De flicker in game options
Toggle between 50-60Hz in wii video options menu
This failing get a better chip or later bios flashed or better installation
The Nintendo Wii console uses proprietory hobbyist screws to protect her technology - Modchip-wizard is a WW distributor for the Wii Triwing Screw Driver or ( Tri-Winga ) technology.
Wii TRI-WING SCREWDRIVER (#000) works perfectly for the following systems
-
Nintendo Gameboy Advance Carts
-
Nintendo DS
-
Nintendo DS Lite
-
Nintendo Gameboy Advance
-
Nintendo Gameboy Advance SP
-
Nintendo Gamecube Controllers
-
Nintendo Wii
Q. Kiaaaa !! Modchip-Wizard - I just got my wii console and love it very much but all my friends told me to contact you guys about getting it upgraded to do even more things - what chip ( as so many different chips out and available now ) do you guys say to -- put the chip my wii. ???
A. Lets do your Nintendo Wii properly - the better option available is the ARGON SPI with our own modified bios flashed before installation -
This setup is excellent - supplied / fitted and flash upgraded.
We need the console for 2 - 8 hours. - Please email a drop off time - we are glad to upgrade your system !!
There are some slightly cheaper options like D2pro and D2CKey but they do not have the compatibility and flexibility of the setup we recommend. "ARGON" and "D2Pro" will enable the console to play games from all regions- Europe, Japan, USA ( NTSC Wii Games ) and still Australia ( PAL Wii Games ) and make legal backup Wii games or copies to play.
Q. Oiiii !! Modchip-Wizard - Hello,
I was wanting to get a wii mod chip.
Where are you located ?
What mod chip do you recommend ?
I was thinking the argon or the Infectus2 chips both look good. As i like to play around with this type of thing. I am just not confident enough in my soldering to do the install myself.
Your thoughts and suggestions would be greatly appreciated.
A. Yes Argon modchip is an awesome chip for all model Wii!!! INFECTUS 2 is also an Awesome developement Modchip-
We can install any version Bios - you like- or you can leave it to our experience - we are happy to install either way- and then you can experiment as much as you like afterwards - still covered by warranty.
After Wiikey installation Please follow the following instructions to complete the setup process: ( only if required )
Latest Wiikey Update Discs:
CONFIG 1.4
UPDATE 1.9S
some Consoles just insert the Wiikey config 1.4 Disc set to Region Free - YES. Then insert Wiikey 1.9 Update Disc.
You can download the latest Config Discs from Wiikey.cn - if your Wiikey boots the Config disc but goes to an Error message which says- "ERROR turn off wii console and check Wii Manual for instructions." ( In this case even original wii games will not work - Likely you have a wii with D2B and 3.1e Wii dashboard - Then try the following:
1. Get hold of a HEX Edited version of the Wiikey GCOS Version - Config 1.3 Disc - this version will boot using a Gamecube controller after it loads eject the disc and insert the Wiikey.cn Update Disc 1.9 and using the gamecube controller hit - Start DVD - the menu will identify your Drive and load the 1.9 Update Disc to the Wiikey Setup menu - Follow the prompts and Wiikey configuration will complete.
2. Now insert the Wiikey Config 1.4 Disc ( no need for HEX Edited version at this point ) and boot to the Wiikey Configuration menu - select Region Free to YES ( Default is NO ) - Save the settings and reboot the Wii Console.
3. If this does not work - just reverse the order and insert the HEX Edited version GCOS disc to load- 1.4 Config Disc first set Region Free to yes then use the 1.9 update disc to complete the setup.
How to prevent bricking your wii
Before playing NTSC Games and updating your dashboards do a quick internet search for games compatibility lists for Modded Wii Consoles and avoid the games that have caused problems for others until the correct patches are made-
Wherever possible use the Backup game from Your Wii consoles region:
Australian Pal Wii Console = use PAL Game isos
Japanese NTSC Wii Console = use JAP NTSC Game isos
USA NTSC Wii Console = use USA NTSC Game isos
Some NTSC games can easily be PAL Patched using the Wii PAL Patcher and with some running the Wii ISO through "Brick Blocker" will also prevent the Wii becoming inoperable.
