modchip-wizard.com XENO GC MODCHIP Playstation 3 | Xbox 360 | Wii | Gamecube | Xbox | PS2 | PSP Hand Held | Contact us | Back to base .... LOGIN | || WORLD WIDE MOD CHIP

 

 

 

XENOGC CHIPS FOR GAMECUBE V 1.A 1.B 1.C

 

GAMECUBE XenoGC Mod chip AU 18.00

 

 

( in kit with Gamebit ScrewDriver )

 

 

 

 

 

 

Nintendo Gamecube Modchip List " All GC Models " Click Here

 

 

 

 

 

Modchip-wizard™ Game console mods

 

 

 

 

modchip-wizard™ Brisbane 0405 080 644

 

modchip-wizard™ Sydney 0405 066 615

 

modchip-wizard™ Melbourne 0433 481 775

 

 

 

EMAIL SUPPORT AND QUICK REPLY --- mods@blade.cc

 

 

 

 

 

 

 

 

 

XenoGC Features

 

 

 

• compatible with all regions & all versions
• direct boot of DVD+-RW media
• supports multi-disc games
• supports Action Reply
• region free loading
• super easy wireless install
• no need to remove mainboard
• PAL/NTSC region force
• installation control LEDs
• switchable read setting adjustment / error retry
• switchable audiofix
• anti-static packaging
• very low price
• selfbooting homebrew linux discs

• Gamecube XenoGC Chips are in Kit with 3 types of wire, Solder, Solder braid & Isopropyl Alcohol

• Gamecube XenoGC Installation Diagrams
• Order

XenoGC Mod chip Gamecube - Installation

 

 

Xeno GC Operation / General Info

 

 

 

You can adjust a few settings by holding various buttons on controller 1 while booting a game. The settings will be in effect per boot and not change behavior permanently.

 

[L] Disable audiofix
If you modified your backup images to work with bioses that didn't support streaming audio correctly, you can disable the native fix.

[R] Disable DREfix
Turns off the native read adjustment/retries. Can be useful if you want to scan a disc for read errors. The chip will not try to prevent any errors and use the default read settings

[X/Y] Force NTSC/PAL display mode
Will force the selected region's display mode regardless of the actual game region. This will work for some games, for others it won't.

[START] Version display
Shows some basic version info (Chip, GC and drive)

Status LEDs
The XenoGC features two status LEDs to indicate correct function. The red LED is active when the drive resets and the chip is doing its job. Once the drive has been patched successfully, the green LED will light up. Check your install if you only get the red LED, or it doesnt light up at all.

 

 

 

 

 

XenoGC Mod chip Versions

 

Xeno GC Version

 

 

it is impossible to tell the difference
in chip version until you install it in a gamecube
because they look the same on the outside.

Here is what I gather from forums about the versions:

 

    XenoGC Version 1.1
         - when you hold start while booting, the
          screen shows BIOS v 1.01, but has NO MENU.

    XenoGC Version 1.5 - XenoGC Version 2.0
          - when you hold start while booting, the
          menu says XenoGC Shell v 1.05, shows the
          contents of the disc, and ALLOWS BOOTING
          MULTI-GAME DISCS.

 

Unfortunately the XenoGC is a simple drive chip, not upgradeable by DVD.

 

Pack 1 Version 10 PS2 w Modbo 4.0 installed 1 controller	$179
Pack 2 Slimline 77002 PSTwo Playstation 2 with Mars Pro mod chip installed 1 controller	$179
Pack 3 Xbox with 10Gig Hard drive & XBMC installed 1 cont	$129
Pack 4 Xbox with 250Gig Hard drive and Aladdin xbox mod chip & XBMC installed 1 cont	$229
Pack 5 Wii Console with Argon Mod-chip installed 1 cont - BOXED	$489